1. Device Name
NJP-600 Fully Automatic Hard Capsule Liquid Filling and Sealing Machine
2. Main technical parameters
|
Machine weight |
1500kg |
|
Dimensions |
3565×1100×2100mm |
|
Motor power |
H.H.K.K.O |
|
power supply |
Three-phase four-wire AC 380V; 50Hz |
|
Highest production capacity |
600 pellets/minute |
|
Refillable capsule models |
00#～2# and safety capsules A～E |
|
Capsule loading rate |
≥99.5% |
|
noise |
≤75dBA |
|
Difference in filling volume |
Liquid 300mg or more ≤±3% |
|
Compressed air |
0.06m3/min 0.3Mpa |
|
Water source requirements |
The water ring vacuum pump is equipped with a water tank for circulation and can also be connected to an external water source. |
|
Vacuum degree |
-0.02～-0.06 MPa |
|
Water flow |
250L/h |
|
Inlet pipe inner diameter |
20mm |
|
Drain pipe inner diameter |
27mm |
|
Operating temperature |
21℃±3℃ |
|
Height requirements for work buildings |
Manual feeding ≥2.6m, vacuum feeding ≥2.8m |
|
Relative humidity of working environment |
40～55% |
|
Exhaust volume |
300m3/h |
|
Control System |
Frequency conversion stepless speed regulation, PLC control |
|
Material |
Parts in direct contact with capsules and liquids are made of 304 and 316L high-quality stainless steel |
