Automatic CIP Cleaning System
The Automatic CIP Cleaning System is a dedicated cleaning station for emulsifying and mixing lines. It combines separate cleaning solution tanks, pumps and pipework, PLC touchscreen controls, and instruments for temperature, pH, conductivity and liquid level.
Automatic CIP Cleaning System
- Separate hot-water, alkaline-solution and acid-solution tanks store the cleaning media.
- Additional chemical containers form part of the dosing arrangement.
- Pumps, valves and connecting pipework form the cleaning circuit.
- A PLC and touchscreen support operation of the cleaning station.
- Temperature sensors monitor the cleaning process.
- pH, conductivity and liquid-level instruments monitor solution and tank conditions.
A Cleaning Circuit for Your Production Equipment
The CIP station brings together cleaning solution storage, pumping and controls. It is a separate part of the production line, connected to the equipment and pipework selected for cleaning. Pumps, valves and connecting pipework form the cleaning circuit. Supply, return and drainage connections are part of the equipment layout.
The control system combines a PLC, touchscreen and process instruments. Define the cleaning sequence and operating requirements around the product residue, equipment and cleaning agents used in your line. Supply, return and drainage routes, available utilities and the cleaning devices on each vessel are part of the line configuration.
Machine Details





System Configuration
Cleaning solution storage, circulation components and operator controls are brought together in a dedicated CIP station.
| Component | Configuration |
|---|---|
| Cleaning solution tanks | Separate hot-water, alkaline-solution and acid-solution tanks |
| Chemical containers | Additional containers for the dosing arrangement |
| Fluid handling | Pumps, valves and connecting pipework |
| Operator controls | PLC and touchscreen |
| Process monitoring | Temperature, pH and conductivity instruments |
| Tank monitoring | Liquid-level instruments |
Start with the equipment you need to clean
A useful CIP specification begins with your production equipment, cleaning requirements and available utilities. Include the following details with your enquiry.
Product & residue
What you produce, the material left after discharge and your cleaning requirements.
Tanks & cleaning devices
Vessel types, capacities and quantities, plus drawings or photos of existing cleaning heads and connections.
Pipework & layout
Pipe sizes, approximate lengths, installation space, and the available supply, return and drainage routes.
Utilities & operation
Available power, water, heating supply and compressed air, together with the operating steps you want to automate.
